CellMapper displays advanced 2G/3G/4G/5G cellular network information and can also record this data to allow you to contribute to our crowd-sourced coverage maps.
CellMapper works on both tablets and phones running Android 4.0 or higher.
Features
- Displays low level cellular network information data along with frequency band calculations (for some providers)
- Reads cellular frequencies and bandwidths on supported Android 7.0+ devices
- Displays a map of both coverage and individual tower sector coverage and bands
- Supports Dual SIMs devices
- Frequency calculator (GSM, iDEN, CDMA, UMTS, LTE, and NR)
Note: The data on the site and within the app is generated shortly after it is uploaded, it may take up to a few days to appear.
Currently supported networks:
- GSM
- UMTS
- CDMA
- LTE
- NR
Visit and follow us:
Reddit
Facebook
Twitter
Visit our our website cellmapper.net.
Permissions
Why does CellMapper need so many permissions?
"make and manage phone calls" - This is required to get low level network data from your device
"access to device location" - In order to map and contribute, we will need to know where the data was recorded from your device.
Older versions of Android:
android.permission.ACCESS_COARSE_LOCATION - To get CellID information
android.permission.ACCESS_FINE_LOCATION - To get GPS location
android.permission.ACCESS_NETWORK_STATE - To get Cellular network information
android.permission.INTERNET - To connect to server to download map data / upload data
android.permission.READ_EXTERNAL_STORAGE - To write external CSV file if no internet connection
android.permission.READ_LOGS - To read Samsung Field Test Mode data on Android 4.1 and earlier (despite what the dialog says, the app cannot read your browsing history unless your browser write it to the system log)
android.permission.READ_PHONE_STATE - To read info about airplane mode / network settings
android.permission.RECEIVE_BOOT_COMPLETED - To start at boot time (if enabled)
android.permission.VIBRATE - To vibrate on CellID change (if enabled)
android.permission.WAKE_LOCK - For phones that do not support 4.2+ CellID Support, to ensure they report correct data
android.permission.WRITE_EXTERNAL_STORAGE - To write external CSV file and debug report
CellMapper แสดงข้อมูลเครือข่ายโทรศัพท์มือถือ 2G / 3G / 4G / 5G ขั้นสูงและยังสามารถบันทึกข้อมูลนี้เพื่อให้คุณมีส่วนร่วมในแผนที่ครอบคลุมพื้นที่ที่มีผู้คนมา
CellMapper ทำงานได้ทั้งบนแท็บเล็ตและโทรศัพท์ที่ใช้ Android 4.0 ขึ้นไป
คุณสมบัติ
- แสดงข้อมูลเครือข่ายเซลลูลาร์ระดับต่ำพร้อมกับการคำนวณย่านความถี่ (สำหรับผู้ให้บริการบางราย)
- อ่านความถี่และแบนด์วิดท์ของโทรศัพท์มือถือบนอุปกรณ์ Android 7.0+ ที่รองรับ
- แสดงแผนที่ของการครอบคลุมและการครอบคลุมพื้นที่และหอคอยแต่ละวง
- รองรับอุปกรณ์ Dual SIMs
- เครื่องคิดเลขความถี่ (GSM, iDEN, CDMA, UMTS, LTE และ NR)
หมายเหตุ: ข้อมูลในเว็บไซต์และภายในแอพจะถูกสร้างขึ้นหลังจากอัปโหลดแล้วอาจใช้เวลาถึงสองสามวันก่อนที่จะปรากฏขึ้น
เครือข่ายที่รองรับในปัจจุบัน:
- ระบบ GSM
- UMTS
- CDMA
- LTE
- NR
เยี่ยมชมและติดตามเรา:
Reddit
Facebook
Twitter
เยี่ยมชมเว็บไซต์ของเรา cellmapper.net
สิทธิ์
ทำไม CellMapper จึงต้องการการอนุญาตมากมาย
"ทำการและจัดการสายโทรศัพท์" - สิ่งนี้จำเป็นสำหรับการรับข้อมูลเครือข่ายระดับต่ำจากอุปกรณ์ของคุณ
"การเข้าถึงตำแหน่งอุปกรณ์" - ในการทำแผนที่และมีส่วนร่วมเราจำเป็นต้องทราบว่าข้อมูลถูกบันทึกไว้ที่ใดจากอุปกรณ์ของคุณ
Android เวอร์ชันเก่ากว่า:
android.permission.ACCESS_COARSE_LOCATION - เพื่อรับข้อมูล CellID
android.permission._FINE_LOCATION - เพื่อรับตำแหน่ง GPS
ช่วยให้รับข้อมูลเครือข่ายเซลลูลาร์
android.permission.INTERNET - เพื่อเชื่อมต่อกับเซิร์ฟเวอร์เพื่อดาวน์โหลดข้อมูลแผนที่ / อัพโหลดข้อมูล
android.permission.READ_EXTERNAL_STORAG E - ในการเขียนไฟล์ CSV ภายนอกหากไม่มีการเชื่อมต่ออินเทอร์เน็ต
android.permission.READ_LOGS - เพื่ออ่านข้อมูลโหมดทดสอบภาคสนามของ Samsung บน Android 4.1 และรุ่นก่อนหน้า (แม้จะมีข้อความแจ้งว่าแอปพลิเคชันไม่สามารถอ่านประวัติการเรียกดูของคุณเว้นแต่ว่าเบราว์เซอร์ของคุณเขียนลงในบันทึกระบบ)
android.permission.READ_PHONE_STATE - หากต้องการอ่านข้อมูลเกี่ยวกับโหมดเครื่องบิน / การตั้งค่าเครือข่าย
android.permission.RECEIVE_BOOT_COMPLETED - เพื่อเริ่มต้นในเวลาบูต (ถ้าเปิดใช้งาน)
android.permission.VIBRATE - เพื่อสั่นสะเทือนเมื่อเปลี่ยน CellID (ถ้าเปิดใช้งาน)
android.permission.WAKE_LOCK - สำหรับโทรศัพท์ที่ไม่รองรับ 4.2+ CellID Support เพื่อให้มั่นใจว่ารายงานถูกต้อง
android.permission.WRITE_EXTERNAL_STORAG E - ในการเขียนไฟล์ CSV ภายนอกและรายงานการแก้ปัญหา